MF 1410

Application:                         MF 1410 is an alkaline membrane cleaning product for cleaning membrane filtration installations made of stainless steel and/or polypropylene, provided with alkaline resistant membranes.  MF 1410 desolves grease, oil, salt and scale.  MF 1410 is mainly used in the metalworking industry. 
     
Description:  

MF 0100 is composed out of special cleaning components which does not damage alkaline- resistance membranes.  These membranes are build in membrane- cleaning installations. MF 1410 should not be reused and only is capable for one cleaning cyclus.
     
Packing:  

Polyethylene buckets of 5 kg. and 25 kg.
     
Precautions:  

All information concerning the safety measures regarding our products can be found on the material safety data sheets provided by us.  During manipulation of the product always wear suitable protective clothing, gloves and an eye/face protection. 

     
Dispensing:   Manual.
     
Controlling:   By titration, or use a conductivity instrument, ask your technical adviser.
     
Technical information:         Form:        MF 1410 is a white granular powder. 
  Specific gr.:

1,108 g/cm3
  pH value:  

pH 12.4 – 1% solution.
  Material tank: 

Stainless steel – polypropylene.
  Removal:

COD-value: 430 mg. O2/g product.

Ask your technical adviser!
     
Use instructions: Cleaning time: Circulation cleaning at 30/60°C. for about 30 till 60 minutes by 0,7 – 1,5%.
  Temperature:      ± 30/60°C.
  Rinse: Allways rinse with fresh water after a cleaning cyclus if required and rinse with MF 0100 afterwards.  Ask your technical adviser. 
  Cleaning time: Depends on soal load, 45 till 90 minutes.
  New solution: Always add the product into warm- or cold water.